Factors Affecting Speaker Better Sound Quality
author: Ada Wu
2022-12-20
2.0 GAMING SPEAKER｜ 2.1 GAMING SPEAKER｜ GAMING SOUNDBAR｜ GAMING HEADSET
Factors Affecting Speaker Better Sound Quality
Test the volume with the tenor and violin.
How to use the computers speaker correctly to make them emit appropriate volume without distortion? Very simple, just listen with your ears. Here I propose two kinds of sounds to test, one is the voice, the other is the voice of the violin.
Let's start with the voice. The voice is the most difficult instrument to express, and also the biggest test of the general speaker unit, especially the tenor and soprano. Please listen to a tenor record (preferably Pavarotti, whose voice energy is the most destructive).
You can only turn on the volume until the tenor is strong enough to sound "bad". If it starts to feel bad, it will have exceeded the load of the speaker. How loud will the loudspeaker sound at this boundary? I don't know.
Some pc surround sound speakers can sing louder, while others can only sing in a lower voice. In the end, you may suddenly find that my loudspeaker can only sing so quietly? It starts to sound bad if you speak louder.
Do not doubt that the speaker unit is not Superman, and it cannot be driven without distortion. How serious is the distortion of the loudspeaker unit when it is overloaded? If you are not an engineer, we may not know, because the speaker description book never lists the distortion figures of the speaker. However, the distortion of the amplifier is very low, so even if the distortion figures are listed, people will not pay attention to it. After the voice test, let's try the violin again. There is no need to use concertos, just violin sonatas.
Only one violin and one piano can be heard clearly. It should be noted that when the sound of the violin starts to tense, scratch and sharpen, there is the limit. At this time, the volume should be lowered a little more until the sound of the violin does not sound tense and the sweet sound of the violin can be revealed. That is the most appropriate volume.
To have a large volume, there must be a large group of units.
Maybe you will be disappointed when you adjust the volume according to the main points, because such a small volume cannot satisfy your hearing. Yes, the reality is very cruel. Otherwise, why would there be multi unit four piece large speakers and large caliber units.
The loudspeaker design engineers know well the limit of loudspeaker units. Therefore, in order to present a large volume without distortion, they must use dozens of small units or a small number of large aperture units, so that each unit can only emit the most appropriate volume. Think about it, the easy, natural and huge sound presented by dozens of undistorted units can not be matched by a small speakers for pc of a tweeter and a bass unit!
But then again, if the overall sound effect of the big speakers can be displayed, it needs to be listened to at an appropriate volume in a larger listening room to have a beautiful sound. We are in a metropolis with a lot of money, and most living rooms are seven or eight ping. It is more practical to put a pair of bookshelf speakers in this small space if we want to put large loudspeakers in this small space, because the sound displayed by large loudspeakers is vague and has no details and dynamics,
The volume is too loud and we are afraid of disturbing our neighbors, so we have to reconsider how to make the bookcase speaker make the best sound. Therefore, no matter what speaker you use, you should know the limit of your own computer usb speakers and control its volume in the most appropriate case.
This is the biggest secret to make your audio sound sound pleasant. Did you find it particularly pleasant to listen to the stereo late at night? In addition to sufficient power supply, the reduction of external noise, which makes the volume relatively low (enough), may also be an important factor.
How to use the computers speaker correctly to make them emit appropriate volume without distortion? Very simple, just listen with your ears. Here I propose two kinds of sounds to test, one is the voice, the other is the voice of the violin.
Let's start with the voice. The voice is the most difficult instrument to express, and also the biggest test of the general speaker unit, especially the tenor and soprano. Please listen to a tenor record (preferably Pavarotti, whose voice energy is the most destructive).
You can only turn on the volume until the tenor is strong enough to sound "bad". If it starts to feel bad, it will have exceeded the load of the speaker. How loud will the loudspeaker sound at this boundary? I don't know.
Some pc surround sound speakers can sing louder, while others can only sing in a lower voice. In the end, you may suddenly find that my loudspeaker can only sing so quietly? It starts to sound bad if you speak louder.
Do not doubt that the speaker unit is not Superman, and it cannot be driven without distortion. How serious is the distortion of the loudspeaker unit when it is overloaded? If you are not an engineer, we may not know, because the speaker description book never lists the distortion figures of the speaker. However, the distortion of the amplifier is very low, so even if the distortion figures are listed, people will not pay attention to it. After the voice test, let's try the violin again. There is no need to use concertos, just violin sonatas.
Only one violin and one piano can be heard clearly. It should be noted that when the sound of the violin starts to tense, scratch and sharpen, there is the limit. At this time, the volume should be lowered a little more until the sound of the violin does not sound tense and the sweet sound of the violin can be revealed. That is the most appropriate volume.
To have a large volume, there must be a large group of units.
Maybe you will be disappointed when you adjust the volume according to the main points, because such a small volume cannot satisfy your hearing. Yes, the reality is very cruel. Otherwise, why would there be multi unit four piece large speakers and large caliber units.
The loudspeaker design engineers know well the limit of loudspeaker units. Therefore, in order to present a large volume without distortion, they must use dozens of small units or a small number of large aperture units, so that each unit can only emit the most appropriate volume. Think about it, the easy, natural and huge sound presented by dozens of undistorted units can not be matched by a small speakers for pc of a tweeter and a bass unit!
But then again, if the overall sound effect of the big speakers can be displayed, it needs to be listened to at an appropriate volume in a larger listening room to have a beautiful sound. We are in a metropolis with a lot of money, and most living rooms are seven or eight ping. It is more practical to put a pair of bookshelf speakers in this small space if we want to put large loudspeakers in this small space, because the sound displayed by large loudspeakers is vague and has no details and dynamics,
The volume is too loud and we are afraid of disturbing our neighbors, so we have to reconsider how to make the bookcase speaker make the best sound. Therefore, no matter what speaker you use, you should know the limit of your own computer usb speakers and control its volume in the most appropriate case.
This is the biggest secret to make your audio sound sound pleasant. Did you find it particularly pleasant to listen to the stereo late at night? In addition to sufficient power supply, the reduction of external noise, which makes the volume relatively low (enough), may also be an important factor.
