How to maintain the speaker and turn on the sound
author: Ada Wu
2022-12-12
2.0 GAMING SPEAKER｜ 2.1 GAMING SPEAKER｜ GAMING SOUNDBAR｜ GAMING HEADSET
How to maintain the speaker and turn on the sound?
How to maintain the speaker and turn on the sound?
Many people mistakenly believe that the pc stereo speakers can be used directly and arbitrarily after being bought. The sound system needs a running in period. Sound speakers can really bring its charm into play. Here, many people have a wrong view. That is, when I bought the audio speaker, I immediately drove it to the maximum sound. I thought that it could fully "activate" the stereo. This method is totally wrong, and it is prone to problems such as sharp, hoarse, broken, uneven, etc.
The correct way is to turn the volume to 1/3, first play some very soothing music, 20 hours, three hours at a time, and then half the volume. Play music of various styles for 30 hours, three hours each time, and the last 2/3 volume. You can insert some fierce music.
In fact, the cooker is a process to let the speakers gradually enter the working state. It's OK to listen normally. Just don't make the gaming stereo speakers as soon as you come up.
After a long time, the cooker is basically completed when the speakers are turned on. Secondly, it is necessary to prevent the big signal from being suddenly hit in the middle. Generally, there are several situations: first, because the potentiometer switch did not turn to the lowest after the last hearing, or because someone else mistakenly moved the potentiometer, it was in a loud state when it was turned on, causing a big signal impact.
Second, there are sudden big dynamic fragments in the music.
In order to emphasize the contrast, most of these fragments have weak signals before the arrival of the big event. At this time, if you are not prepared, turn up the volume. It is easy to damage the horn with a big dynamic signal. Such as loud drums, thunder and so on.
The third situation is that when the audio system is working normally, suddenly dial the signal line and power line, which will produce a large current impact, and it is easiest to find a bad speaker.
Avoid using the stereo in harsh environments
Put some desiccant and desiccant in the rate. In addition, it is also important to prevent cattle and clean the audiophile outdoor speaker. When you don't listen to the speaker, you'd better add a dust cover. The speaker surface can be cleaned by using a towel dipped in warm water and wringing it dry, but you must remember to start the machine after the water is completely dry.
Pay attention to standard operation when using the stereo at ordinary times
Before listening, check whether the wiring is correct and whether the potentiometer position is too large. During startup, shutdown, restart and other operations, the speaker volume should be turned off to the minimum or the power should be turned off to prevent damage to the speaker caused by large impact current. When singing karaoke, try to stay away from the speaker, and do not point the microphone at the speaker. To avoid howling or even burning the tweeter. Different audio systems should be used in different places
When any computer speakers soundbar is turned on at the maximum sound level, it will break the sound and other phenomena will occur, so the volume can be turned on to 8 at most. So which is almost the same. Originally, the power of this stereo is 40W. If ordinary families use 100 square meters of space, it is more than enough. If you put it on the square or use it in a large classroom, its power must be unbearable.
The location of the audio system is particular
First of all, the speaker should be placed in a position that prevents direct sunlight. Should not be placed next to the radiator or in places where the temperature is too low. Otherwise it will cause blistering on the surface of the box or aging of electrical components. Not to mention that the loudspeaker shall be placed in a damp place for a long time to avoid rusting or mildewing of the voice coil.
In addition, do not place the speaker too close to the CRT display. Because the CRT display is too delicate, even the antimagnetic horn will also have a certain impact on the display. Similarly, the speaker should be kept away from the strong magnetic field. If the mobile phone is close to the speaker, it will make noise when calling.
Also, in order to save space, we often put speakers under the computer desktop or stacked them together, which is very unscientific. Even if it is a premium sound card plus a high-end active noise cancelling speaker, it will not have good sound performance in this case. Not to mention the location of telepresence sound field. The correct method should be to place it symmetrically around the monitor (take ordinary 2.1 speakers with subwoofer as an example).
And ensure that the speaker is facing the user, and the position of the bass speaker can be flexible due to the weak direction signal. For speakers with large volume, it is better to use a floor stand. Do not put the speakers directly on the computer table (especially the bass) to avoid resonance with the computer table and distortion.
The correct way is to turn the volume to 1/3, first play some very soothing music, 20 hours, three hours at a time, and then half the volume. Play music of various styles for 30 hours, three hours each time, and the last 2/3 volume. You can insert some fierce music.
In fact, the cooker is a process to let the speakers gradually enter the working state. It's OK to listen normally. Just don't make the gaming stereo speakers as soon as you come up.
After a long time, the cooker is basically completed when the speakers are turned on. Secondly, it is necessary to prevent the big signal from being suddenly hit in the middle. Generally, there are several situations: first, because the potentiometer switch did not turn to the lowest after the last hearing, or because someone else mistakenly moved the potentiometer, it was in a loud state when it was turned on, causing a big signal impact.
Second, there are sudden big dynamic fragments in the music.
In order to emphasize the contrast, most of these fragments have weak signals before the arrival of the big event. At this time, if you are not prepared, turn up the volume. It is easy to damage the horn with a big dynamic signal. Such as loud drums, thunder and so on.
The third situation is that when the audio system is working normally, suddenly dial the signal line and power line, which will produce a large current impact, and it is easiest to find a bad speaker.
Avoid using the stereo in harsh environments
Put some desiccant and desiccant in the rate. In addition, it is also important to prevent cattle and clean the audiophile outdoor speaker. When you don't listen to the speaker, you'd better add a dust cover. The speaker surface can be cleaned by using a towel dipped in warm water and wringing it dry, but you must remember to start the machine after the water is completely dry.
Pay attention to standard operation when using the stereo at ordinary times
Before listening, check whether the wiring is correct and whether the potentiometer position is too large. During startup, shutdown, restart and other operations, the speaker volume should be turned off to the minimum or the power should be turned off to prevent damage to the speaker caused by large impact current. When singing karaoke, try to stay away from the speaker, and do not point the microphone at the speaker. To avoid howling or even burning the tweeter. Different audio systems should be used in different places
When any computer speakers soundbar is turned on at the maximum sound level, it will break the sound and other phenomena will occur, so the volume can be turned on to 8 at most. So which is almost the same. Originally, the power of this stereo is 40W. If ordinary families use 100 square meters of space, it is more than enough. If you put it on the square or use it in a large classroom, its power must be unbearable.
The location of the audio system is particular
First of all, the speaker should be placed in a position that prevents direct sunlight. Should not be placed next to the radiator or in places where the temperature is too low. Otherwise it will cause blistering on the surface of the box or aging of electrical components. Not to mention that the loudspeaker shall be placed in a damp place for a long time to avoid rusting or mildewing of the voice coil.
In addition, do not place the speaker too close to the CRT display. Because the CRT display is too delicate, even the antimagnetic horn will also have a certain impact on the display. Similarly, the speaker should be kept away from the strong magnetic field. If the mobile phone is close to the speaker, it will make noise when calling.
Also, in order to save space, we often put speakers under the computer desktop or stacked them together, which is very unscientific. Even if it is a premium sound card plus a high-end active noise cancelling speaker, it will not have good sound performance in this case. Not to mention the location of telepresence sound field. The correct method should be to place it symmetrically around the monitor (take ordinary 2.1 speakers with subwoofer as an example).
And ensure that the speaker is facing the user, and the position of the bass speaker can be flexible due to the weak direction signal. For speakers with large volume, it is better to use a floor stand. Do not put the speakers directly on the computer table (especially the bass) to avoid resonance with the computer table and distortion.
The Sound Box And Speaker Of Home Theater Audio 
Tracks For Best Test Headphone Sound Quality 
Distinguish Different Types Of Speakers According To The Box Structure 
Different types of speakers (characteristics of speakers box ) 
Important Indicators of Gaming Computer Speakers 
How to select a desktop speaker ? 
Avoid minefields and choose speakers 
Differences and precautions between audio and speaker