Solution to no sound in PC soundbars

2.0 GAMING SPEAKER｜ 2.1 GAMING SPEAKER｜ GAMING SOUNDBAR｜ GAMING HEADSET
 

Usually we like to play music with the PC soundbars, which can not only bring more joy to our life, but also cultivate our sentiments. But what should we do when the PC soundbars has no sound? Let's take a look at the solution.

There are generally two cases of no sound in PC soundbars: hardware and software. In terms of software, although the sound control program is not easy to be damaged, misoperation or careless deletion of some important files during normal use may cause the computer to fail to start audio normally. Hardware problems. The audio system will inevitably have some problems if it is used too long. Here are the reasons for these two aspects.



What should I do if the PC soundbars doesn't make any sound? 1. Hardware reasons​​​​​​​

1. Poor contact
The audio has been used for too long, which causes the aging of the internal circuit. When the audio is connected to the computer, poor contact may cause no sound.

Solution: First, check whether the audio connection is normal. If there is no sound after making sure it is intact, install the driver to see if it is still sound. If the driver is still not good after installation, it means the audio is broken.

2. The audio cable is not connected properly
If the audio cable is not plugged into the corresponding socket, the volume of the audio is at the lowest position, or the speaker is not powered, the computer will lose sound.

Solution: First turn on the audio switch and turn up the volume. If there is no sound, look at the back of the computer host. The audio output at the back usually has three ports, namely red, green, and blue. Red is the microphone, green is the audio, and blue is the output. The audio cable head also has color. You can plug it into the jack of the same color. After plugging, turn on the audio volume to see if there is sound.

3. The audio volume is switched to mute or turned too low
Sometimes you accidentally set the volume to mute or set the audio volume knob to the minimum volume, and there will be no sound.
Solution: Click the speaker icon in the lower right corner of the system, first confirm whether the volume has been turned on, and then adjust the sound to an appropriate level. If the "small speaker" icon in the lower right corner is also missing, enter the "Control Panel", double-click the "Sound and Audio Device" item, select the "Volume" page in the pop-up "Sound and Audio Device Properties" window, then adjust the volume adjustment slider to the appropriate position, tick the "Place Volume Adjustment Icon in the Taskbar", confirm and exit.

4. The computer sound card is damaged
Generally speaking, the lack of sound in a computer is related to software, but it does not rule out the damage of the sound card itself.
Solution: If the sound card hardware is damaged, you can buy a separate sound card and plug it in.

What should I do if the PC soundbars doesn't make any sound? 2. Software reasons

1. Abnormal sound card drive

Disabling the sound card driver, damaging the sound card driver, or installing an unsupported device driver are the main reasons why the PC soundbars does not sound.

Solution: Right click the "My Computer" icon, select "Properties" - "Hardware" - "Device Manager", open "Sound, Video and Game Controller", if the yellow "?" appears in front, It indicates that the driver of the sound card is not installed properly. In this case, just reinstall the sound card driver to solve the problem.

If the prompt "AC chip cannot be found" appears when installing the sound card driver, the sound card driver may be deleted by mistake due to illegal operation, or the computer may be poisoned, or there may be internal software conflicts. In this case, you can only reinstall the system and drivers.